Thank u redrooster all sorted
Cheers Q
CODE, LOCK10 and LOCK13 Information
-
- Posts: 15434
- Joined: Wed Jun 25, 2014 10:14 am
Re: CODE, LOCK10 and LOCK13 Information
LOCK10
To reset LOCK 10 press Preset Button 6 for 10 seconds and the display should reset to CODE ----
This gives 3 more attempts before it fully locks up...so make sure you have the CORRECT code.
LOCK13
LOCK13 means too many wrong codes have been entered.
It can now ONLY be reset by taking it into a Radio Decoding Workshop.
There are no free solutions on the Internet
To reset LOCK 10 press Preset Button 6 for 10 seconds and the display should reset to CODE ----
This gives 3 more attempts before it fully locks up...so make sure you have the CORRECT code.
LOCK13
LOCK13 means too many wrong codes have been entered.
It can now ONLY be reset by taking it into a Radio Decoding Workshop.
There are no free solutions on the Internet
Re: CODE, LOCK10 and LOCK13 Information
Hi i need code for 6000NE serial №M332019
-
- Posts: 15434
- Joined: Wed Jun 25, 2014 10:14 am
Re: CODE, LOCK10 and LOCK13 Information
6734Spike wrote:Hi i need code for 6000NE serial №M332019
Re: CODE, LOCK10 and LOCK13 Information
Ok I tried 6734 it wasn't correct i tried 6733 it was correct code. The radio started for 1 sec and then went back to code menu i entered the code again, nothing different happened. Any ideas ?
-
- Posts: 15434
- Joined: Wed Jun 25, 2014 10:14 am
Re: CODE, LOCK10 and LOCK13 Information
sorry ...typoredrooster wrote:6734Spike wrote:Hi i need code for 6000NE serial №M332019
6733 is correct
Re: CODE, LOCK10 and LOCK13 Information
6733 is correct yes. But do you know why when i type the correct code it accept it. the screen goes to radio freaquency and then back to code screen ?redrooster wrote:sorry ...typoredrooster wrote:6734Spike wrote:Hi i need code for 6000NE serial №M332019
6733 is correct
-
- Posts: 15434
- Joined: Wed Jun 25, 2014 10:14 am
Re: CODE, LOCK10 and LOCK13 Information
The first thing to always check with car radio problems is to make sure all the connectors at the rear are fully pushed in .Spike wrote:6733 is correct yes. But do you know why when i type the correct code it accept it. the screen goes to radio freaquency and then back to code screen ?redrooster wrote:sorry ...typoredrooster wrote: 6734
6733 is correct
Otherwise it could be because the code memory chip is faulty inside the radio.
First try pressing Preset Button 6 for 10 seconds then enter the code again.
If that does not work then remove the radio from the dashboard and leave disconnected overnight.
Put it back the following day and enter the code again.
If that does not work either then the radio will have to be taken in for repair ... or perhaps the better and cheaper option is to buy a working replacement radio ( with a code )
Re: CODE, LOCK10 and LOCK13 Information
Thank you for the info !redrooster wrote:The first thing to always check with car radio problems is to make sure all the connectors at the rear are fully pushed in .Spike wrote:6733 is correct yes. But do you know why when i type the correct code it accept it. the screen goes to radio freaquency and then back to code screen ?redrooster wrote: sorry ...typo
6733 is correct
Otherwise it could be because the code memory chip is faulty inside the radio.
First try pressing Preset Button 6 for 10 seconds then enter the code again.
If that does not work then remove the radio from the dashboard and leave disconnected overnight.
Put it back the following day and enter the code again.
If that does not work either then the radio will have to be taken in for repair ... or perhaps the better and cheaper option is to buy a working replacement radio ( with a code )
Re: CODE, LOCK10 and LOCK13 Information
Hey please HELLLLP! need cod for cd 6000 M052854