Ford Mk3 Denso Radio Code

[redrooster]

If it is beeping as soon as you press a number once then I suspect it is either locked because of too many wrong codes, or faulty.

Try pressing Button 6 for 10 seconds to see what happens

Hello,
you were right, it was strange, so I unplugged battery and after restart, I can enter code with 10 numbers displayed.

It works fine,
Thanks for your help,
best regards,
Have a nice day
Bruno

Yes...that was going to be my final suggestion.

Disconnect from the battery for 30 minutes then see if it resets itself when reconnected

I`ve not had too much experience with these scarcer DENSO units as most radios are either Visteon, Sony or Blaupunkt and it usually makes no difference trying a "disconnect the battery reset" for these 3 makes.

[luksocom1210]

Hello, can you help me please

my sn: M006949

[Classkeeper]

Hello, can you help me please

my sn: M006949

2519

[luksocom1210]

Code 2519 does not work

[Classkeeper]

That the right code for that serial. The unit might have been reprogrammed at some point meaning you'll have to take it to ford.

[redrooster]

Code 2519 does not work

Make sure you are quoting the correct Serial Number as any numbers found in car documents , audio guides etc. are often incorrect.

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing

Radio removal instructions can be found here or on YouTube

www.fitaudio.com/index.php?CategoryID=13

Note: The extractors are available on Ebay ...cheap !

[miki500]

help me please !!

M992050

model CD132-NAV

thx.

[redrooster]

help me please !!

M992050

model CD132-NAV

thx.

8203

[MrGaryD]

Can you help me please?

My serial number is V029723

[redrooster]

Can you help me please?

My serial number is V029723

Already answered

Please post ONCE only to avoid confusion