Free Ford Radio Code Forum

BrunoCARM wrote:

redrooster wrote:If it is beeping as soon as you press a number once then I suspect it is either locked because of too many wrong codes, or faulty.

Try pressing Button 6 for 10 seconds to see what happens

Hello,
you were right, it was strange, so I unplugged battery and after restart, I can enter code with 10 numbers displayed.

It works fine,
Thanks for your help,
best regards,
Have a nice day
Bruno

Yes...that was going to be my final suggestion.

Disconnect from the battery for 30 minutes then see if it resets itself when reconnected

I`ve not had too much experience with these scarcer DENSO units as most radios are either Visteon, Sony or Blaupunkt and it usually makes no difference trying a "disconnect the battery reset" for these 3 makes.

Hello, can you help me please

my sn: M006949

luksocom1210 wrote:Hello, can you help me please

my sn: M006949

2519

Code 2519 does not work

That the right code for that serial. The unit might have been reprogrammed at some point meaning you'll have to take it to ford.

luksocom1210 wrote:Code 2519 does not work

Make sure you are quoting the correct Serial Number as any numbers found in car documents , audio guides etc. are often incorrect.

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing

Radio removal instructions can be found here or on YouTube

www.fitaudio.com/index.php?CategoryID=13

Note: The extractors are available on Ebay ...cheap !

help me please !!

M992050

model CD132-NAV

thx.

miki500 wrote:help me please !!

M992050

model CD132-NAV

thx.

8203

Can you help me please?

My serial number is V029723

MrGaryD wrote:Can you help me please?

My serial number is V029723

Already answered

Please post ONCE only to avoid confusion