Downloads By Category


Ford Key Fob Reprogramming


If you need to program a new key or an old key in which the battery has died, this document will guide you through the process of programming the key to your car. Follow the easy steps and in a few minutes you should have successfully programmed you key!

FORD Fiesta 96 (Infrared 2 Button) - Key Remote Programming

1. Turn Ignition switch to Position I and back to 0 as soon as the PATS LED in the clock lights (The system is now ready for programming, to a maximum time limit of 30 seconds)

2. Remove Key from Ignition, hold the FOB towards the Interior Light, and press and hold the Single Arrow. Wait until the light on the Key flashes, then press the Double Arrow 3 times., release the Single Button

3. Both LEDs (Key & Clock) should flash to acknowledge programming is successful

4. To exit learn Mode, turn Ignition to II and then 0

5. A Maximum of 4 Remotes are possible

FORD Puma (Infrared 2 Button) - Key Remote Programming

1. Turn Ignition switch to Position I and back to 0 as soon as the PATS LED in the clock lights (The system is now ready for programming, to a maximum time limit of 30 seconds)

2. Remove Key from Ignition, hold the FOB towards the Interior Light, and press and hold the Single Arrow. Wait until the light on the Key flashes, then press the Double Arrow 3 times., release the Single Button

3. Both LEDs (Key & Clock) should flash to acknowledge programming is successful

4. To exit learn Mode, turn Ignition to II and then 0

5. A Maximum of 4 Remotes are possible

FORD Mondeo 93> Mondeo 96> (Infrared 2 Button) - Key Remote Programming

1. Unlock Vehicle, and turn ignition to position 1.

2. Wait until the PATS LED illuminates (app 10 seconds)

3. Switch Ignition to 0 – within 5 seconds – LED will remain on

4. Point the Remote at one of the front Receivers

5. Press a button and keep pressed – within 20 seconds of step 3

6. When the LED on the Key lights press the other button 3-5 times

7. Release both buttons while still aiming at the receiver

8. If successful, both LED’s will flash 5 times

9. Repeat 5—9 for additional transmitters (within 30 seconds)

10 .When completed, Turn Ignition to II then 0 to store the Keys

FORD Mondeo 98½> Scorpio 95> (Radio 3 Button) - Key Remote Programming

1. Turn Ignition 4 times from 0 to I, ending at position I. A tone should sound.

2. Press the Remote Unlock button – another tone should sound.

3. Additional Remotes can be added by repeating Step 2, within ten seconds of each remote.

4. To exit turn Ignition to 0 – another audible sound should be made.

FORD Mondeo 96> Scorpio > 98 (Radio 2 Button) - Key Remote Programming Procedure

1. Turn Ignition to II, then turn ignition from II to I and back 4 times within 3 seconds.

2. The PATS LED on dash should light.

3. Turn Ignition to 0. Then press Unlock button and keep it pressed until the PATS LED flashes 4 times (new fob first, then old)

4. Turn Ignition to II, then back to 0 to end.

FORD Fiesta 96> & Escort 98> (Radio 3 Button) - Key Remote Programming

1. Insert Key and turn to II, then Turn Key from II to I and back to II four times within 3 seconds

2. The PATS LED should light. Turn Key to Position 0.

3. Press the Unlock button and keep it pressed until the PATS LED flashes 4 times.

4. Add additional fobs the same way. Turn to II and back to 0 to end.

FORD Focus (Radio 3 Button) - Key Remote Programming

1. Switch Ignition On/Off (II/0) 4 times within 6 seconds until a sound is made.

2. Press any button on Remote until a sound is made.

3. To program additional Remotes, repeat after 2 seconds after the sound.

4. Turn Ignition On/Off to exit.

5. A maximum of 4 remotes can be programmed.

FORD Cougar (Radio 3 Button) - Key Remote Programming Procedure

1. Turn Ignition On (II) and Off (0) 4 times within 6 seconds

2. With the Ignition at 0 the PATS LED should light continuously.

3. Press any button on the Radio Remote within 10 seconds

4. The LED should flash to acknowledge

5. Further Remotes (max. 4) can be added by pressing any button.

6. Program mode will end if Ignition turned on, or no new Remote Detected within 10 seconds

NOTE : The first Cougars were 3 seconds instead of 6, and 20 seconds instead of 10.

FORD Transit (2000.5MY) - Remote Key Programming

1. Close all the doors.

2. Turn Ignition key from position 0 to II eight times within 10 seconds.

3. Make sure the vehicle locks and unlocks the doors.

4. Press the remote transmitter button within 20 seconds., and make sure the vehicle locks and unlocks all the doors.

5. Up to 20 seconds is allowed to programme the next remote transmitter.

6. To programme additional remote transmitters, repeat steps 4 and 5.

7. Turn the ignition key to position 0 to exit the programming mode.

Note : Maximum 4 remote transmitters may be programmed.

Note : . Ensure the vehicle battery is fully charged and the anti-theft alarm system is not armed or triggered.

Note : If programming ends with no new remote transmitters, the originals are retained.

Note : The anti-theft alarm and double locking module will exit programming mode automatically if four new remote transmitters have been programmed or if no new remote transmitter has been programmed within the 20 second programming mode.

Please help support us by visiting one of our sponsored links, or if its that time of year why not get an insurance quote through us!