Downloads By Category


Honda Key Fob Reprogramming


If you need to program a new key or an old key in which the battery has died, this document will guide you through the process of programming the key to your car. Follow the easy steps and in a few minutes you should have successfully programmed you key!

Programming of Infra Red remote controls.

NOTE : Maximum of 3 can be programmed.

NOTE : Please ensure time delays are maintained, otherwise procedure will not be completed correctly.

1. Turn ignition ON.

2. Within 4 seconds push the transmitter button aiming the transmitter at the receiver unit above the rear view mirror.

3. Within 4 second turn ignition OFF.

4. For additional remote controls repeat steps 1 to 4 within 4 seconds of pro- gramming the last remote control.

5. Turn ignition ON.

6. Within 4 seconds push the transmitter button aiming the transmitter at the receiver unit above the rear view mirror.

7. The door actuator should operate.

8. Within 8 seconds aim the first remote control at the receiver and press the transmitter button.

9. The door actuator should operate.

10. Within 8 seconds aim the second remote control at the receiver and press the transmitter button.

11. The door actuator should operate.

12. Within 8 seconds aim the third remote control at the receiver and press the transmitter button.

13. Turn ignition OFF, and remove key.

14. Confirm all remote controls operate.

Please help support us by visiting one of our sponsored links, or if its that time of year why not get an insurance quote through us!