Re: How To Input Your Radio Code
Posted: Mon Feb 12, 2018 1:53 am
8213Windowstew wrote:Please can someone give me the code for 6000 cd serial no M026312. Many thanks if you can.
https://www.freefordradiocode.co.uk/forum/
https://www.freefordradiocode.co.uk/forum/viewtopic.php?t=2329
8213Windowstew wrote:Please can someone give me the code for 6000 cd serial no M026312. Many thanks if you can.
Windowstew wrote:Hi Redrooster,
Thank you very much for giving me that code for my radio.
Unfortunately I get a message back saying 'incorrect '
Am I doing something wrong?
Regards.
Stew.
I do not recognise that Serial Numbertiagosk wrote:I just have this information, how can I get the key?
3AA906775
If my radio is not blinking and I used the 3 attempts but not 10. what is the next step please?, How to make it blinking againClasskeeper wrote: ie. Ford 2000, 2001, 2005, 2007, etc
[/b]
Switch the radio on and the word CODE followed by three dashes should appear in the display. These three dashes should be flashing.
Enter the three digit code by repeatedly pressing station presets 1-3 until each digit is correctly displayed, followed by preset 4 to accept the code. The unit should then function normally.
If, after switching the radio on, the three dashes do not flash, then 3 or more incorrect code entries have been attempted.
If a number 10 appears in the display, then ten incorrect codes have been tried and the unit will need to be decoded by a car radio servicing specialist.
Leave it switched ON for an hour or more and it should reset itselfMarioA wrote:If my radio is not blinking and I used the 3 attempts but not 10. what is the next step please?, How to make it blinking againClasskeeper wrote: ie. Ford 2000, 2001, 2005, 2007, etc
[/b]
Switch the radio on and the word CODE followed by three dashes should appear in the display. These three dashes should be flashing.
Enter the three digit code by repeatedly pressing station presets 1-3 until each digit is correctly displayed, followed by preset 4 to accept the code. The unit should then function normally.
If, after switching the radio on, the three dashes do not flash, then 3 or more incorrect code entries have been attempted.
If a number 10 appears in the display, then ten incorrect codes have been tried and the unit will need to be decoded by a car radio servicing specialist.