Page 1 of 2

Code Generator Code Not Working - Help Please

Posted: Fri Jun 01, 2018 4:13 pm
by john191260
Hi, my 6000 CD RDS

Serial Sticker Ford = M 179779

Code Generated = 4458

I input by using the 1 2 3 4 digits on radio front rapid pressing to select 4 4 5 8 then press button 5 on radio as I have NO 'Select' button.

This does not unlock radio.

Any advice please, I am now at attempt 6 waiting 30 mins each time.

Re: Code Generator Code Not Working - Help Please

Posted: Fri Jun 01, 2018 4:42 pm
by chippy
are you sure it is M serial not V

v serial would give 0706

Re: Code Generator Code Not Working - Help Please

Posted: Fri Jun 01, 2018 7:45 pm
by john191260
Thanks Chippy, I'm away to try that.... I wondered if the M serial related to an original radio in 2005 and this 6000CD model perhaps installed at a later date.

Re: Code Generator Code Not Working - Help Please

Posted: Fri Jun 01, 2018 7:55 pm
by john191260
@ Chippy - Update - I forgot to leave my radio 'ON' so have to wait 30mins to try that 0706 CODE. What I did though was the 1 - 6 combo test to check the serial and received the info :- 50 70 2000
90 00 00

No letter prefix M or V at all.

Re: Code Generator Code Not Working - Help Please

Posted: Fri Jun 01, 2018 10:01 pm
by john191260
0706 did not work. I have the original radio manual with a sticker inside with the M****** serial. I have tried to remove radio without success using the pins in each hole to check if still the original radio. I guess I will have to wait until i get proper 'removal' tools to release the radio from its chassis.

Re: Code Generator Code Not Working - Help Please

Posted: Fri Jun 01, 2018 11:46 pm
by dave1234
Have you "keep 1 pressed" ?
Hold down buttons 6 and 1, and then release 6 (keep 1 pressed).

Re: Code Generator Code Not Working - Help Please

Posted: Sat Jun 02, 2018 6:13 am
by john191260
@ Dave, yes I tried release 6 hold 1 and a series of 3 screens rotates with the info :- 50 70 2000 - 09 00 00 - DP MV 200, then returns back to 'CODE'-- -- -- --.
I also tried 6 + 2 - release 6 hold 2 but nothing.

Re: Code Generator Code Not Working - Help Please

Posted: Sat Jun 02, 2018 7:13 am
by dave1234
Maybe try a coat hanger http://www.talkford.com/community/topic ... hout-keys/

With that method you would probably need someone to help. It sounds very tricky with a coat hanger though.

Video that shows how the mechanism works https://www.youtube.com/watch?v=HVQDBMGD_p0

Re: Code Generator Code Not Working - Help Please

Posted: Sat Jun 02, 2018 9:30 am
by john191260
Tried poking 4 allan keys in and then using my 4 hands!!! impossible lol.... I might try the coat hanger method otherwise its off to halfords.

Re: Code Generator Code Not Working - Help Please

Posted: Mon Jun 04, 2018 12:36 pm
by redrooster
john191260 wrote:Tried poking 4 allan keys in and then using my 4 hands!!! impossible lol.... I might try the coat hanger method otherwise its off to halfords.
Ebay is much cheaper for extractors